The Stainless Steel Bogota Pi Lock Pick Set has gained a lot of popularity over the years and for good reason. These picks are created from stainless steel, are minimal in design and high in functionality.
The name Pi comes from the fact these picks are approximately 3.14159265359 inches long. These entry tools are lightweight, functional, and ready to go wherever you go.
These lock picks are designed to pick pin tumbler locks. Not all pin tumbler locks can be picked with Lock Picks. Identification of lock type and a thorough understanding and knowledge of the lock is required to be proficient at picking locks.
Insert a tension tool into the keyway and apply slight tension in the direction of the unlock position. Only apply slight pressure to the tension bar. Excessive pressure binds the pins, whereas slight pressure "captures" the pins as they are picked.
Using a lock pick inserted into the keyway, start moving the pins in an upward motion so the pins line up with the shear line. As each pin is "captured" the tension bar should move ever so slightly.
Once all the pins are aligned (captured) on the shear line, the lock opens by turning the tension bar.
250+ PRODUCTS SHIP FREE
Look for the "SHIPS FREE" icon and get new gear delivered for no extra cost.
30 Days to make sure you love it. Free returns/exchanges for US addresses.
If there are any problems with your order, we will make it right.